Bewinch BEWINCH · PRODUCT KNOWLEDGE
BEWINCH · H-SERIES UNDER-SINK CONNECTED PURIFIER · NEW 2026

Bewinch H7 Suge ConnectedJSC-RL802 Connected

Hyper-Nano Bionic Filtration · pH7.6 Mineralized Alkaline Water · AI Smart Faucet · Whole-Home Pipeline Connectivity

The Bewinch H7 Suge Connected is an under-sink reverse-osmosis water purifier newly launched in the H-series. It is built on Japanese Toray Hyper-Nano bionic filtration, with three precision filters delivering pH7.6 low-sodium, light-mineral spring water. The servo vacuum heat-pump system boosts hot-water output 5×. The AI integrated alloy smart faucet works with wet hands and shows live purified-water TDS. The connected edition adds a dedicated pipeline-machine supply port to extend purified water to the living room and dining area, paired with WiFi and a full-area self-cleaning & UV sterilization system that guards your water 24 hours a day. It carries a five-star taste rating from the China Household Electric Appliance Research Institute.

pH7.6
Low-Sodium Spring Water
5-6y
Hyper-Nano RO Membrane
5×
Hot-Water Output
5y
Store Warranty
01

Product Overview

Suitable Households & Scenarios

Who is it suitable for?

Under-sink households: The main unit is hidden under the cabinet, leaving only the smart faucet on the counter — no countertop footprint, a clean and tidy kitchen.

Families with babies or seniors: pH7.6 low-sodium, light-mineral alkaline water; instant hot water from the servo vacuum heat pump; a wet-hand smart faucet with a light ring for easy use by the elderly and children.

Multi-point water needs: The connected edition adds a pipeline-machine supply port that extends purified water to the living room and dining area — one under-sink unit feeding points around the home.

Taste & long-filter-life seekers: Five-star taste certified by the China Household Electric Appliance Research Institute; the grade-2 Hyper-Nano RO membrane lasts 5-6 years, so filters are changed less often.

What is the H7 Suge Connected?

The H7 Suge Connected (factory model JSC-RL802 Connected) is the connected upgrade of the H7 Suge under-sink purifier. Keeping the three-filter precision system, pH7.6 mineralized alkaline water, servo vacuum heat pump, and AI smart faucet, it adds a dedicated pipeline-machine supply port that lets it feed a pipeline machine for whole-home purified water, plus WiFi connectivity that works with the smart faucet to monitor purified-water TDS in real time.

The main unit sits under the sink; the AI integrated alloy smart faucet on the counter handles ambient and hot water and preset-volume dispensing, with the light ring reflecting running status at a glance.

Core Highlights

Hyper-Nano Filtration
Japanese Toray membrane
pH7.6 Alkaline Spring
Low-sodium, 5-star taste
Servo Vacuum Heat Pump
5× hot-water output
AI Smart Faucet
Wet-hand touch, live TDS
Pipeline Connectivity
Whole-home supply port
Full-Area Self-Cleaning
24h UV protection
5-6-Year RO Membrane
Fewer filter changes
Free Installation
H-Series service

Core Technology Details

Hyper-Nano Bionic Filtration (Japanese Toray Membrane)

The H7 Suge Connected uses Japanese Toray Hyper-Nano bionic filtration with three precision filters working together to remove sand, rust, residual chlorine, color and odor, heavy metals, bacteria and viruses. The grade-2 reverse-osmosis membrane is a Japanese Toray Hyper-Nano membrane with high precision and high flux, lasting 5-6 years with stable long-term purification.

pH7.6 Low-Sodium, Light-Mineral Spring Water

The grade-3 natural coconut-shell activated-carbon filter further mineralizes and polishes the RO pure water to deliver pH7.6 low-sodium, light-mineral spring water — sweet, smooth, and certified five-star for taste by the China Household Electric Appliance Research Institute.

AVP Micro-Bubble Oxygenation

During filtration the system produces micro-bubbles that activate the water and lift its mouthfeel, leaving every cup smooth and sweet.

Servo Vacuum Heat-Pump System

The servo vacuum heat-pump greatly improves hot-water output — 5× that of a traditional under-sink purifier — so a full cup of hot water is ready on demand for brewing and direct drinking.

AI Integrated Alloy Smart Faucet

The countertop faucet works with wet hands (anti-mistouch) and shows the live purified-water TDS. The light ring changes color with status: blue = ambient, red = hot, green = draining, orange = self-cleaning, purple = UV sterilization — so you always know the machine's state.

Full-Area Self-Cleaning & Sterilization

The unit auto-flushes and supports manual self-cleaning, paired with UV sterilization that guards the water path 24 hours a day and suppresses microbial growth to keep water fresh.

Connected Edition Exclusive: Whole-Home Pipeline Supply

This is the key feature that sets the connected edition apart. A dedicated "pipeline machine" supply port on the back lets you feed a pipeline machine installed elsewhere (living room, dining room) — one under-sink unit, multiple whole-home water points. It is off by default; turn it on manually as described under Daily Use.

Accessories & Consumables

Accessory / ConsumableDescriptionWhere to Get
Grade-1 Pre-Composite FilterReplace about every 18-24 monthsOfficial store / service
Grade-2 Hyper-Nano RO FilterReplace about every 5-6 years; Japanese Toray membraneOfficial store / service
Grade-3 Coconut-Shell Carbon FilterReplace about every 18-24 monthsOfficial store / service
AI Integrated Alloy Smart FaucetIncluded; wet-hand touch, TDS display + light ringOfficial support
Pipeline-Machine Port PlugConnected-edition port; keep the plug if no pipeline machine is connectedStandard part

Use only Bewinch original filters and parts. Non-original parts may cause substandard water, poor sealing, or machine failure, and any resulting damage is not covered by the warranty. Pipeline-machine connections must be made by a professional installer.

02

Specifications

Core Parameters

ModelH7 Suge Connected (factory model: JSC-RL802 Connected)
CategoryReverse-osmosis home water purifier (under-sink, with instant hot water and smart faucet)
LaunchedSeptember 2026 (new H-Series model)
Water TypepH7.6 mineralized alkaline water (low-sodium, light-mineral spring water)
FiltrationHyper-Nano bionic filtration, three-filter structure
RO MembraneJapanese Toray Hyper-Nano RO membrane (grade 2)
MineralizationNatural coconut-shell carbon filter + AVP micro-bubble oxygenation
Hot WaterServo vacuum heat pump, 5× hot-water output
FaucetAI integrated alloy smart faucet, wet-hand touch, live TDS, light-ring status
Light RingBlue ambient / red hot / green drain / orange self-clean / purple UV
Ambient Volume0.5L / 1L / 1.5L (three presets)
Hot Volume0.2L / 0.3L / 0.5L / 1L (four presets)
Hot ModesEco mode (long-press "Eco" 5s to switch) / insulated-tank heating mode
Child LockLong-press the faucet knob 5s to toggle
ConnectivityPipeline-machine supply port (connected edition) + WiFi
SterilizationFull-area self-cleaning: auto-flush + manual self-clean + UV, 24h protection
Taste RatingFive-star taste, China Household Electric Appliance Research Institute
Power220V~ 50Hz
InstallationUnder-sink (free on-site installation)

Filter Information

StageFilter NameReplacementMembrane Brand
Stage 1Pre-Composite FilterAbout 18-24 months—
Stage 2Hyper-Nano RO FilterAbout 5-6 yearsJapanese Toray
Stage 3Coconut-Shell Carbon FilterAbout 18-24 months—

Actual filter life depends on local water quality, usage volume, and inlet temperature; follow the filter-life indicator on the smart faucet/panel. In areas with high raw-water TDS, filters may age faster — this is normal.

Power & Energy

ItemValue / Notes
Rated Voltage / Frequency220V~ 50Hz
Standby PowerAbout 2.7W
Purification PowerAbout 150W
Tank Heating PowerAbout 800W (insulated-tank mode)
Eco Instant Heat PowerAbout 2000W (instant heating, short use = saves power)
Water SavingAuto-flush + manual self-clean; servo heat pump raises hot-water efficiency
SterilizationFull-area self-cleaning + UV, 24h protection, suppresses microbes

Eco mode heats instantly (about 2000W) — hot on demand, short use. Insulated-tank mode keeps the tank warm (about 800W). Long-press "Eco" for 5 seconds to switch between them to match your usage habits.

03

First Use

What's in the Box

ItemDescription
Purifier Main UnitH7 Suge Connected unit (three filters pre-installed)
AI Integrated Alloy Smart FaucetCountertop faucet, wet-hand touch, TDS display + light ring
Inlet / Drain TubesUnder-sink connecting tubing
Faucet Mounting PartsFaucet fixings, tee ball valve, etc.
Pipeline-Machine Port PlugOn the connected edition; keep the plug if no pipeline machine is connected
Manual / Warranty CardUser manual, warranty card, certificate of conformity

The H7 Suge Connected is an under-sink model with free on-site installation. A Bewinch professional should mount the unit, connect the tubing, and install the faucet — never disassemble the water path yourself.

Installation Guide

Under-Sink Installation Requirements

1. Place the main unit on a flat floor under the kitchen cabinet, with a power outlet (220V/50Hz) nearby.

2. Connect the inlet tee to the municipal water supply; run the drain tube to a drain.

3. Mount the AI smart faucet at a suitable countertop position and connect it to the unit's purified-water line.

4. If connecting a pipeline machine, the installer runs the pipeline-machine tubing at the same time (see Daily Use > Pipeline Connectivity).

5. After installation, the installer checks water/power and performs the first flush.

Under-sink plumbing carries a leak risk and must be installed by a Bewinch professional. Do not disassemble the water fittings yourself.

First Flush

New-Unit First-Flush Procedure

1. After install, open water and power — the unit auto-flushes; drain the first few cups of purified water.

2. Dispense ambient water continuously through the smart faucet until the flow is clear, free of bubbles, and has no noticeable carbon-powder smell.

3. Flush each hot setting once to activate the hot-water lines and filters.

4. Watch the faucet light ring and TDS; once the purified-water TDS stabilizes, the water is ready to drink.

The first water from a new unit may have a slight carbon-powder smell or fine bubbles — normal for new filters; it goes away after a thorough flush. The installer usually performs this for you.

04

Daily Use

Dispensing Water from the Smart Faucet

Dispensing Ambient Water

Select the ambient setting on the AI smart faucet and press the knob to dispense; the light ring glows blue. Ambient preset volumes are 0.5L / 1L / 1.5L and stop automatically when the set volume is reached.

Dispensing Hot Water

Select a hot setting; the light ring glows red. Hot preset volumes are 0.2L / 0.3L / 0.5L / 1L. The servo vacuum heat pump gives 5× hot-water output, so a full cup is ready on demand.

Beware of scalding when dispensing hot water; children must use it under adult guidance.

Child Lock (Faucet Knob)

Long-press the faucet knob for 5 seconds to turn on the child lock, which locks hot-water dispensing to prevent accidental scalding by children. Long-press 5 seconds again to unlock.

Reading the Light Ring
Light RingStatus
BlueDispensing ambient water
RedDispensing hot water
GreenDraining / flushing
OrangeSelf-cleaning running
PurpleUV sterilization running

Hot-Water Modes

Eco Mode vs Insulated-Tank Heating Mode

The unit has an "Eco" button; long-press it for 5 seconds to switch between the two hot-water modes:

  ①Eco mode (instant heat): about 2000W instant heating — hot on demand, short use, good for intermittent use and saves power.

  ②Insulated-tank heating mode: the tank keeps warm at about 800W — good for continuous, large hot-water demand with more stable temperature.

Choose by your habits: small, frequent use favors Eco; continuous morning tea/formula use favors insulated-tank mode.

Water-Quality Monitoring (Smart Faucet TDS)

Live Purified-Water TDS Display

The AI smart faucet shows the live purified-water TDS. TDS (total dissolved solids) reflects dissolved impurities; a lower TDS means cleaner water, so you can check water quality at any time from the faucet.

TDS is only one reference indicator of water quality and varies within a range with inlet water and environment; small fluctuations are normal and do not by themselves mean poor water quality.

Connected Edition: Pipeline-Machine Supply

The H7 Suge Connected can feed a pipeline machine in the living room or dining area for whole-home multi-point purified water. This function is off by default and must be turned on manually before use.

How to Connect a Pipeline Machine

1. Connect the tube: remove the plug from the "pipeline machine" port on the back of the unit, insert the pipeline-machine inlet tube into the port, and tighten it.

2. Turn on supply: long-press the unit's "Filter Reset" and "Eco" buttons together for 5 seconds to enable pipeline-machine supply.

3. Turn off supply: long-press the "Self-Clean" and "Eco" buttons together for 5 seconds to disable it.

Pipeline supply is off by default. If you are not connecting a pipeline machine, keep the port plug in place — do not remove it. The tubing connection should be made by a professional installer to ensure a sealed, leak-free joint.

Self-Cleaning & Auto-Flush

Auto-Flush and Manual Self-Cleaning

The H7 Suge Connected has a full-area self-cleaning system: it flushes the tubing automatically during filtration and use, and you can trigger a manual self-clean with the unit's "Self-Clean" button — the light ring glows orange while it runs. The UV lamp (purple) works on a cycle to keep the water path clean 24 hours a day.

After coming home from a long absence, run a manual self-clean first before using the water.

05

Filters & Care

Filter Structure & Life

The H7 Suge Connected uses a three-filter structure — replace whichever filter reaches the end of its life. The smart faucet / unit panel shows the life of each filter; replace it with a Bewinch original filter promptly when due.

StageFilter NameRecommended LifeFunction
Stage 1Pre-Composite FilterAbout 18-24 monthsRemoves sand, rust, suspended matter; adsorbs residual chlorine, color and odor
Stage 2Hyper-Nano RO FilterAbout 5-6 yearsJapanese Toray membrane; blocks heavy metals, bacteria, viruses; long-life filtration
Stage 3Coconut-Shell Carbon FilterAbout 18-24 monthsImproves taste, natural mineralization; delivers pH7.6 alkaline spring water

The grade-2 RO membrane lasts 5-6 years, greatly reducing filter changes. Stages 1 and 3 are replaced about every 18-24 months. Actual life follows the unit indicator, local water quality, and usage.

Replacing & Resetting Filters

Filter Replacement & Reset Steps

1. Close the inlet tee and cut power; open the under-sink unit's filter compartment.

2. Unscrew the expired old filter, insert the matching new filter, and screw it fully home.

3. Restore power and water, then press the unit's "Filter Reset" button for that stage to reset its life indicator to full.

4. After resetting, run one self-clean / flush before normal use.

We recommend a Bewinch service technician replace and reset the filters to ensure a sealed water path. Non-original filters may not be recognized/reset, may cause abnormal water quality, and will void the warranty.

Daily Care

Main Unit & Faucet Care

1. Keep the under-sink unit ventilated and dry; avoid standing water.

2. Wipe the AI smart faucet with a soft dry cloth; avoid corrosive cleaners.

3. Run self-cleaning regularly to keep the water path hygienic.

4. After a long absence, flush before using the water.

5. If you find water on the under-sink floor, close the inlet tee first and contact support to inspect the tubing.

06

FAQ

Water Quality & Taste

What kind of water does the H7 Suge Connected dispense?
Water QualityAlkalineMineralized

After the Japanese Toray Hyper-Nano RO membrane, the water passes through a natural coconut-shell carbon filter for mineralization and taste adjustment, delivering pH7.6 low-sodium, light-mineral alkaline spring water — sweet and smooth, with a five-star taste rating from the China Household Electric Appliance Research Institute.

What does the TDS reading on the smart faucet mean?
TDSMonitoring

TDS (total dissolved solids) reflects dissolved impurities in the water. The faucet shows live purified-water TDS; a lower number means cleaner filtration. TDS is only one reference indicator and varies within a range with inlet water and environment — it does not by itself decide water quality.

Why does the new unit's water smell / have bubbles?
New UnitOdorBubbles

A new filter may give off a slight carbon-powder smell or fine bubbles at first — this is normal. Flush and drain until the water is clear and odorless before drinking.

Operation & Connectivity

What is the difference between the Connected and the standard edition?
ConnectedDifferencePipeline

The Connected edition adds a dedicated "pipeline machine" supply port that extends purified water to a living-room/dining-room pipeline machine, plus WiFi for live TDS monitoring through the AI smart faucet. Core filtration, hot water, and the smart faucet are identical to the standard edition.

How do I connect a pipeline machine?
PipelineConnectivitySetup

Remove the plug from the back "pipeline machine" port and connect the pipeline-machine inlet tube; long-press "Filter Reset" + "Eco" together for 5 seconds to turn on supply, and long-press "Self-Clean" + "Eco" together for 5 seconds to turn it off. It is off by default; have a professional install the tubing.

What do the light-ring colors mean?
Light RingStatusFaucet

Blue = ambient water, red = hot water, green = draining/flushing, orange = self-cleaning, purple = UV sterilization. Use the color to tell the machine's current status.

How do I turn on the child lock?
Child LockSafetyAnti-Scald

Long-press the faucet knob for 5 seconds to lock hot-water dispensing and prevent accidental scalding by children; long-press 5 seconds again to unlock.

How do I switch between Eco and insulated-tank mode?
EcoHot WaterMode

Long-press the unit's "Eco" button for 5 seconds to switch. Eco mode is instant heat (about 2000W), hot on demand and power-saving; insulated-tank mode (about 800W) suits continuous, large hot-water demand.

Filters & After-Sales

How often do I replace the filters?
FiltersLifeReplacement

Stage-1 pre-composite and stage-3 carbon filters: about every 18-24 months. Stage-2 Japanese Toray Hyper-Nano RO membrane: about every 5-6 years. Follow the unit's filter-life indicator.

How long is the H7 Suge Connected warranty?
After-SalesWarrantyExtension

H-Series products carry a 5-year store warranty (3-year base warranty + 2-year extension after registering on the official account / mini-program), with free on-site installation. National service hotline: 400-828-0808.

Do I need to install it myself?
InstallationFree Install

No. The H7 Suge Connected is an under-sink model with free on-site installation; a Bewinch professional mounts the unit, connects the water path, installs the faucet, and performs the first flush.

07

Troubleshooting

Smart faucet does not light up / no display?

Symptom
The AI smart faucet screen is dark with no display.
Cause
The main unit is not powered, or the power/connection is abnormal.
Solution
Check that the under-sink unit's power plug is seated and the outlet is live. If the faucet still does not display, contact official support to check the faucet connection cable.

No purified water / abnormal filtration?

Symptom
The faucet gives no purified water, or filtration is noticeably slow.
Cause
Inlet tee closed, water outage, expired/clogged filter, or abnormal power.
Solution
① Confirm the municipal inlet tee is open and there is no outage; ② check the filter-life indicator and replace expired original filters; ③ confirm the unit is powered. If it still does not filter, contact official support.

No hot water / hot water not hot enough?

Symptom
Selecting a hot setting gives no hot water, or the temperature is low.
Cause
May be a single large draw in instant-heat Eco mode, the tank not preheated, or the child lock holding hot water.
Solution
① Confirm the child lock is unlocked; ② for continuous large hot-water demand, long-press "Eco" 5s to switch to insulated-tank mode; ③ wait for the tank to preheat before dispensing. If it remains abnormal, contact support.

WiFi won't connect?

Symptom
WiFi connection fails and the unit cannot go online.
Cause
Weak WiFi signal, abnormal network setup, or a faulty WiFi module.
Solution
Re-run the WiFi setup per the user manual and check the under-sink WiFi signal strength. If it still won't connect after following the manual, contact official support.

Water on the under-sink floor / leak?

Symptom
Water pooling on the under-sink floor or around the unit.
Cause
Loose fitting, filter not fully seated, or a clogged/disconnected drain tube.
Solution
Immediately close the inlet tee, cut power, wipe up the water, and contact official support for an on-site check of the tubing and fittings. Never disassemble the water path yourself.

Still shows filter expired after replacement?

Symptom
After fitting a new filter, the faucet/panel still shows the filter as expired.
Cause
The filter was not reset after replacement, or it is not fully seated.
Solution
After replacing the filter, press the unit's "Filter Reset" button for that stage; confirm the filter is screwed fully home. If it still shows expired after reset, contact support.

Self-cleaning won't run / orange ring off?

Symptom
No response after triggering self-cleaning manually, and the orange light ring does not come on.
Cause
The unit is mid-filtration/dispensing and must be idle to trigger; or the button operation is incorrect.
Solution
Wait until the unit stops dispensing and is idle, then press "Self-Clean"; the ring glows orange while it runs. If it still won't run after several tries, contact support.

Pipeline machine gives no water?

Symptom
After connecting a pipeline machine, it dispenses no purified water.
Cause
Pipeline supply is not enabled, or the tubing is not connected properly.
Solution
① Confirm you long-pressed "Filter Reset" + "Eco" together for 5s to enable pipeline supply; ② check that the pipeline-machine inlet tube is tight. If it still gives no water, contact support to inspect the tubing.

Off-taste / TDS rising?

Symptom
The water tastes worse or off, or the faucet shows a notably higher purified-water TDS.
Cause
Expired filter, long period without self-cleaning, or declining RO-membrane performance.
Solution
① Run one manual self-clean; ② check filter life and replace expired original filters; ③ flush and see whether the TDS settles. If TDS stays high, contact support to test the RO membrane.
08

Comparison

H7 Suge Connected vs H7 Suge Standard

ItemH7 Suge Connected (JSC-RL802 Connected)H7 Suge Standard (JSC-RL802)
PositioningH-Series under-sink connected · 2026.09H-Series under-sink purifier
FiltrationHyper-Nano bionic (Japanese Toray membrane)Hyper-Nano bionic (Japanese Toray membrane)
Water TypepH7.6 low-sodium, light-mineral alkaline springpH7.6 low-sodium, light-mineral alkaline spring
FiltersThree (1: 18-24mo / 2: 5-6yr / 3: 18-24mo)Three (1: 18-24mo / 2: 5-6yr / 3: 18-24mo)
Hot WaterServo vacuum heat pump, 5× outputServo vacuum heat pump, 5× output
Smart FaucetAI alloy faucet, wet-hand touch, TDS displayAI alloy faucet, wet-hand touch, TDS display
Pipeline Supply✅ Connected-only port; feeds a whole-home pipeline machine❌ No pipeline port
WiFi✅ WiFi connectivity—
InstallationUnder-sink, free on-site installUnder-sink, free on-site install
Warranty5-year store warranty (3 base + 2 on registration)5-year store warranty (3 base + 2 on registration)

The Connected and Standard editions share identical core filtration, hot water, and smart faucet. The Connected adds the pipeline-machine supply port for homes that want purified water extended to a living-room/dining-room pipeline machine. If you only use a single kitchen faucet, the standard edition is enough.

This page shows the H7 Suge Connected (JSC-RL802 Connected); please distinguish it from the standard edition when ordering.

Bewinch H-Series Under-Sink Lineup

ModelPositioningHighlights
H7 Suge ConnectedH-Series under-sink connectedHyper-Nano + servo heat pump + whole-home pipeline + AI smart faucet
H7 Suge StandardH-Series core under-sinkHyper-Nano + servo heat pump + AI smart faucet

The H-Series is Bewinch's under-sink RO lineup, delivering pH7.6 low-sodium, light-mineral alkaline spring water, with free on-site installation and a 5-year store warranty.

09

Support & Downloads

After-Sales Policy

ServiceDetails
Store Warranty5 years (3-year base + 2-year extension after registering on the official account / mini-program)
Free InstallationFree on-site installation (under-sink unit + smart faucet)
Service Network1,300+ after-sales service centers nationwide

The H7 Suge Connected is part of the Bewinch H-Series with a 5-year store warranty and free on-site installation. Register on the Bewinch official account / mini-program after purchase to activate the 2-year extension on top of the 3-year base warranty, totaling 5 years. Bewinch operates nearly 3,000 physical stores and 1,300+ service centers nationwide.

Contact

National Service Hotline

400-828-0808

Online Support & Warranty Registration

For online support and to activate the 2-year extension, contact the store where you purchased or the official Bewinch online store and register your product on the official account / mini-program after purchase.

Buy Bewinch products and original filters only through official channels; beware of refurbished/demo units and filters sold at low prices through special channels.

Installation & Repair Booking

1. After purchase, book the free on-site installation through the Bewinch mini-program or online support;

2. A professional checks water/power and performs the first flush after install;

3. For later repairs, call 400-828-0808 or book through online support;

4. After booking, a specialist calls to confirm the visit time.

Safety Precautions

  • Read the user manual carefully before use and keep it for future reference.
  • The under-sink water path must be installed by a Bewinch professional; never disassemble the water fittings yourself.
  • Children must dispense hot water under adult guidance to avoid scalding.
  • Use municipal tap water only, inlet temperature 5°C-35°C.
  • Connect the power cord only to a supply matching the rated voltage on the rating plate (220V~ 50Hz).
  • Keep the under-sink unit ventilated and dry; if you find an under-sink leak, close the inlet tee and cut power immediately.
  • Although the smart faucet works with wet hands, mind electrical safety and avoid prolonged spraying.
  • Replace original filters on time and reset the filter after replacement.
  • Non-original filters may cause abnormal water quality, poor sealing, and loss of warranty.
  • Keep the port plug in the pipeline port when no pipeline machine is connected; connections must be made by a professional to ensure a seal.
  • After more than 72 hours without use, flush and self-clean before using the water again.
  • If the unit makes unusual noise, leaks, or shows any other fault, close the inlet tee, unplug it, and call the national service hotline.

Manual & Video Tutorials

User Manual
PDF format · Full operating instructions · Includes installation and pipeline-supply guide
Download Manual

If the manual PDF cannot be downloaded, call support at 400-828-0808 to request it.