Bewinch BEWINCH · PRODUCT KNOWLEDGE
BEWINCH · M-SERIES UF PURIFIER · 2023

Bewinch M3 YingchuanJST-U307

Bacteria-Free Fresh Water · Retro Elegant · Compact · 6 Temperature Presets

The Bewinch M3 Yingchuan is the 2023 M-Series ultrafiltration purifier. Its three-filter structure — ion-exchange resin for scale reduction, a PP+carbon composite filter for chlorine/odor, and a UF ultrafiltration membrane that removes bacteria while keeping minerals — delivers fresh, drinkable water with no boiling needed. Instant heat reaches 98°C in 3 seconds, with 6 temperature presets (45/55/65/75/85/98°C) and 2 volume presets (100/200mL). In a milky-white retro finish on an 185mm narrow body, add water and plug in for 1-3 people.

UF
Bacteria-Free Fresh Water
3s
Instant Heat
6
Temp Presets
2y
Whole-Unit Warranty
01

Product Overview

Suitable Households & Scenarios

The M3 Yingchuan is Bewinch's 2023 M-Series UF purifier, focused on "bacteria-free fresh water, retro elegance, and a compact body." It suits the following people and scenarios:

Who is it suitable for?

Small households (1-3 people): A 2.5L raw tank (2023) / 3.0L (Sam's Club) covers daily direct drinking and brewing for 1-3 people.

Renters / students: No installation — add municipal tap water and use; move it whenever you move.

Office / studio flat: Only 185mm wide in milky-white retro finish; fits a desk, tea corner, or sideboard; hot in 3 seconds, no kettle.

Mineral-preserving water: UF keeps beneficial minerals; the output is fresh, bacteria-free water that balances purification and taste.

Why choose the M3 Yingchuan?

If you want a no-install, milky-white retro entry purifier that removes bacteria via UF, heats in 3 seconds, with 6 temp and 2 volume presets, the M3 Yingchuan is the compact pick in the M-Series. For RO pure water, a larger tank, or more features, see the Bewinch G-Series.

Brand Background

Bewinch is the premium purification brand of Lexy Electric Co., Ltd. (A-share listed), built on Lexy's award-winning design, manufacturing, and R&D.

Bewinch runs a global R&D center with nearly 1,000 engineers and designers, a doctoral workstation, and a CNAS-accredited national laboratory, holding nearly 50 purification patents, with nearly 3,000 physical stores and 1,300+ after-sales centers nationwide.

As the inventor of countertop purifiers, Bewinch was recognized by CCTV as a "Great Nation Brand" in 2021 and has served 20 million+ families worldwide.

Product Positioning

The M3 Yingchuan is the 2023 M-Series UF purifier in a milky-white retro finish — bacteria-free fresh water, 6 temperature presets, 2 volume presets, 3-second instant heat, and a compact body. Scope: small households of 1-3, renters, dorms, offices, and compact kitchen/bedroom/study spaces. No installation — add municipal tap water and use. The output is mineral-preserving fresh water, drinkable without boiling.

What is Fresh Water (UF Mineral-Preserving)?

The M3 Yingchuan uses ultrafiltration (UF), centered on the UF-3.0-U106 membrane (fits U307/U308), paired with an ion-exchange resin filter and a PP+carbon composite filter across three stages. The UF membrane pore size is about 0.01-0.1µm, removing bacteria, colloids, and large organic molecules while keeping beneficial minerals such as calcium and magnesium — the output is fresh water, drinkable without boiling.

Where is fresh water suitable?

Daily drinking: Drink directly after bacteria removal; minerals keep the taste crisp.

Brewing tea: 6 levels from 45°C formula to 98°C tea — dedicated temperature for each.

Kitchen water: Safer for rice, soup, and rinsing fruit.

UF produces no waste water — good if you want to avoid it. But UF cannot remove heavy metals; in areas with extremely hard water or heavy-metal exceedance, choose an RO model.

Bewinch Product Line

SeriesPositioningRepresentative ModelsHighlights
N Series
Smart Purifier
Ideal, smart, quality, healthyN9Pro / N9s / N9Max
N7 / N5
Hydrogen water, smart touch, premium flagship
G Series
Countertop Purifier
Lifestyle, safe, steady, familyG7s / G7i / G7
G3 Pro / G5
Mineral alkaline water, instant heat, modular wellness
S Series
Premium Brewing
Extraction, tea, wellness, luxuryS9 / S5 / S1Simulated open-flame brewing, tea & wellness
M / Q Series
Mini Purifier
Portable, compact, entryM3 Yingchuan / M3 Pro / Q5 / Q7Compact, entry price, rental-friendly

As the inventor of countertop purifiers, Bewinch has served 20 million+ families, with nearly 3,000 stores and 1,300+ service centers nationwide.

Core Highlights

UF Bacteria-Free
UF-3.0 keeps minerals
Ion-Exchange Resin
Reduces scale, better taste
3s Instant Heat
98°C on demand
6 Temp Levels
45-98°C covered
2 Volume Presets
100/200mL
Compact 185mm
Narrow, no install
Milky-White Retro
Yingchuan finish
Self-Replaceable Filters
Twist and lift

Core Technology Details

Three-Stage UF System

Stage-1 ion-exchange resin reduces scale and improves taste; stage-2 PP+carbon composite removes sand/rust and adsorbs chlorine, color, and odor; stage-3 UF membrane (UF-3.0-U106) removes bacteria, colloids, and large organics. Working together, the output is mineral-preserving fresh water, drinkable without boiling.

3-Second Instant Heat

The instant-heat element heats from ambient to 98°C in about 3 seconds — fresh-boiled on demand, no repeated boiling. Six levels (45/55/65/75/85/98°C) cover ambient drinking, warm formula, and hot tea.

Dispensing Light Indicator

The spout light has three colors: blue for ambient water, red for hot water, green for draining — so you can tell the water status at a glance, safely and intuitively.

Certification

Sanitation approval: (Su) Wei Shui Zi (2024) No. 3205-0095. Standards: GB4706.1 / GB4706.19, Q/320505LK 006.

Accessories & Consumables

The M3 Yingchuan is a no-install countertop UF purifier with no external lines or expansion modules; daily accessories are mainly filters and cleaning consumables, replaced as needed.

AccessoryDescriptionReplacement
Stage-1 Ion-Exchange Resin FilterIon-exchange scale reduction, better taste, eases scalingAbout 6 months
Stage-2 PP+Carbon Composite FilterPP melt-blown + carbon; removes sand/rust, adsorbs chlorine, color, odorAbout 6 months
Stage-3 UF Filter (UF-3.0-U106)Removes bacteria, colloids, large organics; fits U307/U308About 1 year
Food-Grade Citric DescalerPeriodic descaling of raw tank and heat linesEvery 3-6 months
Drip TrayCatches splashes; removable for rinsingAs needed

Buy original filters through the official store, mini-program, or 1,300+ service centers. Non-original parts may cause substandard water or machine faults.

02

Specifications

Core Parameters

ModelJST-U307 (M3 Yingchuan, 2023)
CategoryHome purifier (countertop UF purifier)
ColorYingchuan milky white
Water TypeFresh water (UF mineral-preserving)
FiltrationUF + ion-exchange resin + PP+carbon composite, three stages
HeatingInstant heat, 3 seconds
Hot Levels6: 45/55/65/75/85/98°C
Volume Presets2: 100mL / 200mL
Dispense LightBlue ambient / red hot / green drain
Raw Tank2.5L (2023) / 3.0L (Sam's Club)
Purified Tank300mL
Rated Purified Capacity1000L
Flow48 L/h
Inlet Temp5°C - 35°C
Inlet WaterMunicipal tap water
Working Pressure0.05 - 0.1 MPa
Suitable For1-3 people
Power220V~ 50Hz, 2200W
Size (W×H×L)185 × 388 × 328 mm
InstallationNo-install countertop; add water and plug in

Filter Information

Three independent filters — replace whichever expires. The panel shows a smart filter-life indicator.

StageFilterReplacementFunction
1Ion-Exchange Resin FilterAbout 6 monthsScale reduction, better taste
2PP+Carbon Composite FilterAbout 6 monthsSand/rust; chlorine, color, odor
3UF Filter (UF-3.0-U106)About 1 yearBacteria, colloids, large organics; fits U307/U308

Filter life depends on power-on time, local water, daily volume, and pressure. Unopened filters have a 5-year shelf life — store in a cool, dry place.

Power & Environment

ItemValue / Notes
Rated Power2200W (instant heat; heats only while dispensing)
Voltage / Frequency220V~ 50Hz
HeatingInstant heat; ambient to 98°C in ~3s; fresh-boiled
Waste WaterUF unit — no concentrate/waste water
Scale InhibitorNo chemical inhibitor; softens via ion-exchange resin
Energy SavingAuto screen-off standby; instant heat saves power vs. a re-boiling kettle
Wetted MaterialsFood-grade; meet drinking-water standards

After 72+ hours unused, drain the old water before use.

03

First Use

What's in the Box

ItemDescriptionQty
Main UnitM3 Yingchuan purifier (milky-white)1
Raw TankRaw tank (built-in stage-1 resin filter)1
Purified Tank300mL purified tank1
FiltersStage-2 PP+carbon and stage-3 UF filter, pre-installed2
Drip TrayTray under the spout1
Power CordDedicated main-unit cord1
Manual / WarrantyUser manual, warranty card, certificate1 set

If any part is missing or damaged, contact online support or call 400-828-0808.

Placement & Setup

No-Install Placement

1. Put it on a steady, solid, level surface, out of direct sun, humidity, and heavy cooking fumes.

2. Leave ventilation space around it; do not press the back or sides against a wall or cabinet.

3. Place near a grounded 220V/50Hz outlet; do not pinch or pull the cord.

4. The counter must support the unit plus water; avoid table edges.

Before First Power-On

1. Confirm all three filters and both tanks are seated.

2. Fill the raw tank to the max line with matched tap water (5-35°C).

3. Confirm voltage matches the rating plate (220V~ 50Hz) before powering on.

New-Unit Flush Guide

Flush Steps

1. Start filtration: Fill the raw tank to the max line, refit the unit, power on, and wait until the pump stops and the water lamp goes out.

2. Drain & flush (×3): Long-press "Dispense/Stop" for ~5s to enter drain mode (light turns green); the purified tank drains automatically. Empty the drip tray, refill, and repeat 3 times to fully flush filters and lines.

New filters and lines may carry a slight factory smell — it fades with repeated flushing.

04

Daily Use

Dispensing Water

Dispensing Ambient Water

Once the purified tank has water, press "Dispense/Stop" for ambient water; the spout light turns blue.

Dispensing Hot Water

1. Press "Hot Unlock" first.

2. Press "Temp" to choose a level (45/55/65/75/85/98°C).

3. Press "Dispense/Stop" to dispense hot water.

4. Press again to stop when you have enough.

The light turns red for hot water. Hold the cup close to the spout to avoid hot splashes.

Volume Presets & Draining

Choose 100/200mL and press "Dispense/Stop" — it stops automatically at the set volume. To drain, long-press "Dispense/Stop" ~5s until the beep (light green); it drains and stops automatically, or press again to stop.

Temperature Levels & Uses

LevelRecommended Use
AmbientDaily drinking and hydration; mineral-preserving fresh water, crisp taste
45°CBaby formula, warm drinking; ideal formula temperature that preserves nutrition
55°CHoney water, mild tea — gentle on the palate
65°CFlower/fruit tea; gently releases aroma
75°CFruit drinks, delicate green tea, early pour-over coffee
85°CGreen tea, coffee extraction; draws out tea polyphenols and coffee aroma
98°CBlack tea, oolong, pu-erh — full boiling brew

Filter Reset & Long Idle

How to reset after a filter change?

1. Long-press "Temp" ~5s to enter filter selection.

2. Short-press "Temp" to select the filter to reset (stage 1/2/3).

3. Long-press "Hot Unlock" ~3s to reset it; the indicator returns to full.

After fitting a new filter, repeat the drain cycle 3 times to fully soak it before normal use.

After 72+ hours unused?

The screen shows H2. Empty the old raw water, refill with fresh tap water, long-press "Dispense/Stop" 5s to drain, and repeat filtration-drain 3 times to fully replace the stored water before drinking.

05

Filters & Care

Filter Structure & Life

Three independent filters — replace whichever expires. Follow the panel indicator.

StageFilterReplacementFunction
1Ion-Exchange Resin FilterAbout 6 monthsScale reduction, better taste
2PP+Carbon Composite FilterAbout 6 monthsSand/rust; chlorine, color, odor
3UF Filter (UF-3.0-U106)About 1 yearBacteria, colloids, large organics

Filter life depends on power-on time, local water, and daily volume; replace per the indicator.

Replacing & Resetting Filters

Replacement Steps

1. Cut power and open the top cover.

2. Hold the old filter handle, turn to unlock, and lift it out.

3. Align the new filter with the slot, insert, and turn to lock.

4. Power on; long-press "Temp" 5s, short-press to select the filter, long-press "Hot Unlock" 3s to reset.

5. Drain-flush 3 times to soak the new filter.

Do not pull out a filter while the unit is filtering (it causes air lock). Use Bewinch original filters (UF-3.0-U106, fits U307/U308). Non-original parts may void the warranty.

Cleaning & Descaling

Cleaning Tanks & Body

Raw tank: Clean every 1-2 months with a soft cloth and neutral detergent, rinse, and refit. For scale, dissolve 5-10g citric acid in 65°C water, soak 30-60 min, then wipe and rinse.

Drip tray: Empty and rinse it regularly.

Body: Wipe with a soft dry or slightly damp cloth; avoid corrosive cleaners and hard scourers. Keep it out of direct sun, humidity, and heavy fumes.

Descaling the Heat Lines

Descale every 3-6 months: (1) Citric acid: add warm water and food-grade citric acid to the raw tank, run filtration/dispense to circulate, soak 15-30 min, drain, rinse 2-3 times. (2) White vinegar: circulate a vinegar-water solution, soak ~1 hour, drain, and rinse 5-6 times until no vinegar smell.

Never immerse the whole unit; rinse the lines thoroughly after descaling.

06

FAQ

Water Quality

Must I boil the water before drinking?
WaterDirectUF

No. The M3 Yingchuan uses UF filtration; the three filters remove bacteria to produce fresh, drinkable water straight from the tap. It also heats to 98°C in 3 seconds when you want hot water.

What is the difference between UF and RO?
UFRODifference

UF filters at about 0.01-0.1µm — removes bacteria, colloids, large organics — but keeps minerals and produces no waste water. RO filters at 0.0001µm and removes heavy metals, bacteria, and viruses, but produces waste water and pure water. The M3 Yingchuan is a UF unit for good water that keeps minerals; for very hard or heavy-metal areas, choose a G/N-Series RO model.

Why is the hot flow weaker than ambient?
HotFlowPhysics

By energy conservation, a higher target temperature needs more heating power; at max power the unit reduces flow to reach the set temperature. The hotter you set it, the lower the flow — this is normal.

Operation

What to do before first use?
NewFlushDrain

Fill the raw tank and filter to full; long-press "Dispense/Stop" 5s to drain (green light), empty; refill and repeat filtration-drain 3 times. New filters may carry a slight factory smell that fades with flushing.

How do I get hot water?
OperationHotUnlock

Press "Hot Unlock" first, choose a temperature with "Temp" (45-98°C), then press "Dispense/Stop". The spout light turns red for hot water.

Can I pour hot water into the tank?
TankWarningRaw Water

Never pour hot water into the raw tank — it may deform the tank. Use municipal tap water at 5-35°C; never add sewage, drinks, or other liquids, which harm filters and may clog lines.

After 72+ hours unused?
IdleH2Drain

The screen shows H2. Empty the old water, refill with fresh tap water, drain, and repeat filtration-drain 3 times before drinking.

Filters

Why do filters wear out fast?
FilterLifeWear

Life depends on power-on time, local water, and daily volume. Poor raw water or heavy daily use shortens life — normal; follow the indicator.

What happens if I don't replace on time?
FilterReplaceImpact

Filtration weakens over time; overdue filters may lose effectiveness, cause secondary contamination, or clog lines. Replace promptly when prompted.

How often do I replace filters?
FilterCycleLife

Stage-1 resin ~6 months; stage-2 PP+carbon ~6 months; stage-3 UF (UF-3.0-U106) ~1 year. Actual life follows the panel indicator.

Do filters have a shelf life?
FilterShelf LifeStorage

Unopened filters keep for 5 years in a cool, dry place — safe to stock up.

After-Sales

How long is the whole-unit warranty?
ServiceWarranty

The M3 Yingchuan carries a 2-year whole-unit warranty; non-user-caused quality faults within 2 years are covered free. National hotline: 400-828-0808.

Do I need on-site installation?
ServiceInstallNo Install

No. The M3 Yingchuan is a no-install countertop unit — add tap water and plug in; no professional installation or on-site visit needed.

07

Troubleshooting

Display won't light?

Symptom
Display dark, unit unresponsive.
Cause
The main unit is not powered.
Solution
Seat the power plug and confirm the outlet is live (220V~ 50Hz). If it still won't light, call 400-828-0808.

No filtration / very low flow?

Symptom
The unit does not filter, or purified flow drops sharply.
Cause
Filter expired/clogged, wrong voltage, or raw water too cold.
Solution
Check filter life and replace if due; confirm voltage matches the plate; check inlet temperature and use 5-35°C water. If it still won't filter, contact support.

No hot water?

Symptom
No hot water after selecting a hot temperature.
Cause
Hot not unlocked, hot temp not selected before dispensing, or purified tank too low.
Solution
Press "Hot Unlock", set the temperature, then press "Dispense/Stop"; wait until the purified tank has enough water before drawing hot.

Off taste?

Symptom
Off taste or abnormal flavor.
Cause
Filter expired, or unit long unused.
Solution
Check filter life and replace; after a long idle, drain the stored water and clean the tank; complete the full flush on a new unit.

Shows H2 code?

Symptom
Screen shows H2.
Cause
Unused over 72 hours; the system reminds you to drain and refresh the stored water.
Solution
Empty the old raw water, refill with fresh tap water, long-press "Dispense/Stop" 5s to drain, and repeat filtration-drain 3 times.

Still shows filter expired after a change?

Symptom
Still prompts expired after fitting a new filter.
Cause
The filter was not reset.
Solution
Long-press "Temp" 5s, short-press to select the filter, long-press "Hot Unlock" 3s to reset. If it still won't reset, contact support.

Noisy / unusual sound?

Symptom
Noticeable noise while filtering or heating.
Cause
Raw tank empty (dry run), unstable placement, filter not seated, or normal pump hum (soft hum is normal).
Solution
Check raw-tank level and refill; level the unit; open the cover and check filters. A soft pump/heat sound is normal. If there is strong noise or vibration, contact support.

Leak under / around the unit?

Symptom
Water pooling under or around the unit.
Cause
Splashed water during use, raw tank not seated, or a loose filter.
Solution
Check for splashing; reseat the raw tank; cut power and check filters are seated, refitting and tightening. If it still leaks, cut power and contact support — never disassemble it yourself.

Slow flow / low volume?

Symptom
Noticeably reduced output.
Cause
Filter expired/clogged, or raw tank empty.
Solution
Replace the filter; add tap water. If still slow after replacement, contact support.

Strong smell on a new unit?

Symptom
Smell persists after repeated flushing.
Cause
Slight factory smell in new filters and lines.
Solution
Open the top cover and air 24 hours; complete the drain-flush cycle 3+ times; the smell fades with flushing. If it persists, contact support.

Touch unresponsive / buttons dead?

Symptom
Buttons do not respond when pressed.
Cause
Water on the screen, or a panel fault.
Solution
Dry the touch panel and retry; if all buttons are dead, power-cycle. If still unresponsive, contact support for a panel check.
08

Comparison

M3 Yingchuan vs M3 Pro Huyun

ItemM3 Yingchuan (U307, 2023)M3 Pro Huyun (U307)
PositioningM-Series UF purifier · 2023M-Series entry bacteria-free purifier
ColorYingchuan milky whiteHuyun (retro elegant)
Water TypeFresh water (UF mineral-preserving)Bacteria-free fresh (composite UF-3.0)
HighlightsBacteria-free drinking, retro, compactComposite UF bacteria-free, ion-exchange scale reduction
Hot Levels6 (45/55/65/75/85/98°C)7 temperature levels
Volume2 (100/200mL)2 presets
Raw Tank2.5L (2023) / 3.0L (Sam's)3.0L
Purified Tank300mL0.3L
FiltersResin + PP/carbon + UF (UF-3.0-U106)Pre-composite + UF main + resin layer
Flow48 L/h48 L/h
Rated Capacity1000L1000L
Size185×388×328mm~185×388×328mm
Power2200W2200W
People1-31-3
Warranty2-year whole-unit2-year national (1Y replace-not-repair)

Both share the U307 platform with the same core purification and heating; the differences are color, tank version, and presets. The M3 Yingchuan is the 2023 milky-white version with a 2.5L (2023) / 3.0L (Sam's) tank; the M3 Pro Huyun is the retro Huyun finish with a 3.0L tank. This page shows the M3 Yingchuan — please distinguish the model and finish when ordering.

M-Series Lineup

ModelPositioningHighlights
M3 YingchuanM-Series UF purifier · 2023Milky-white, bacteria-free drinking, 6 temps/2 volumes, 3s heat
M3 Pro HuyunM-Series entry bacteria-freeComposite UF bacteria-free, ion-exchange scale reduction, retro finish
M5 FulaM-Series upgradeUpgraded UF, larger tank
Q5 / Q7Q-Series mini purifierUltra-compact, entry price

Want the retro milky-white compact UF experience? Choose the M3 Yingchuan. Want a 3L tank and more temperature presets? Choose the M3 Pro Huyun. For RO pure water, larger tanks, or wellness features, see the G-Series.

09

Support & Downloads

After-Sales Policy

ServiceDetails
Whole-Unit Warranty2 years (from purchase; non-user quality faults covered free)
Service Network1,300+ service centers nationwide
Hotline400-828-0808

The M3 Yingchuan carries a 2-year whole-unit warranty. Bewinch operates nearly 3,000 physical stores and 1,300+ service centers nationwide.

Contact

National Service Hotline

400-828-0808

Online Support

For online support, contact the store where you purchased through the official Bewinch online stores or mini-program. Buy original filters only through official channels.

Booking On-Site Repair

1. Call the service hotline 400-828-0808 to book;

2. After booking, a specialist calls to confirm the visit time;

3. A Bewinch professional performs on-site service, setup, and guidance.

Safety Precautions

  • Read the user manual carefully before use and keep it for future reference.
  • Children must operate the unit under adult guidance to avoid scalding.
  • Do not disassemble, repair, or modify the unit yourself.
  • Connect the cord only to a supply matching the rating plate (220V~ 50Hz).
  • Use matched municipal tap water at 5-35°C.
  • Never pour hot water into the raw tank — it may deform.
  • Place the unit steadily and keep water out of the electrical parts.
  • Never immerse or spray the whole unit.
  • Replace filters on time; the cycle varies with water use and quality.
  • After a new filter, wait for the purified tank to fill, drain it, and repeat 3 times.
  • Do not use corrosive cleaners on the body.
  • Do not place containers of water, medicine, food, or small metal objects on top.
  • If the unit makes unusual noise or leaks, unplug it immediately and call the national hotline.
  • After 72+ hours unused, fully drain the internal water, refill, and repeat filtration-drain 3 times before reuse.
  • Non-original filters may have hygiene/sealing issues and may cause abnormal water or shorten machine life.

Manual & Video Tutorials

User Manual (BEWINCH-U307)
PDF format · Full operating instructions · Includes setup guide
Download Manual