Bewinch M3 YingchuanJST-U307
The Bewinch M3 Yingchuan is the 2023 M-Series ultrafiltration purifier. Its three-filter structure — ion-exchange resin for scale reduction, a PP+carbon composite filter for chlorine/odor, and a UF ultrafiltration membrane that removes bacteria while keeping minerals — delivers fresh, drinkable water with no boiling needed. Instant heat reaches 98°C in 3 seconds, with 6 temperature presets (45/55/65/75/85/98°C) and 2 volume presets (100/200mL). In a milky-white retro finish on an 185mm narrow body, add water and plug in for 1-3 people.
Product Overview
Suitable Households & Scenarios
The M3 Yingchuan is Bewinch's 2023 M-Series UF purifier, focused on "bacteria-free fresh water, retro elegance, and a compact body." It suits the following people and scenarios:
Small households (1-3 people): A 2.5L raw tank (2023) / 3.0L (Sam's Club) covers daily direct drinking and brewing for 1-3 people.
Renters / students: No installation — add municipal tap water and use; move it whenever you move.
Office / studio flat: Only 185mm wide in milky-white retro finish; fits a desk, tea corner, or sideboard; hot in 3 seconds, no kettle.
Mineral-preserving water: UF keeps beneficial minerals; the output is fresh, bacteria-free water that balances purification and taste.
If you want a no-install, milky-white retro entry purifier that removes bacteria via UF, heats in 3 seconds, with 6 temp and 2 volume presets, the M3 Yingchuan is the compact pick in the M-Series. For RO pure water, a larger tank, or more features, see the Bewinch G-Series.
Brand Background
Bewinch is the premium purification brand of Lexy Electric Co., Ltd. (A-share listed), built on Lexy's award-winning design, manufacturing, and R&D.
Bewinch runs a global R&D center with nearly 1,000 engineers and designers, a doctoral workstation, and a CNAS-accredited national laboratory, holding nearly 50 purification patents, with nearly 3,000 physical stores and 1,300+ after-sales centers nationwide.
As the inventor of countertop purifiers, Bewinch was recognized by CCTV as a "Great Nation Brand" in 2021 and has served 20 million+ families worldwide.
Product Positioning
The M3 Yingchuan is the 2023 M-Series UF purifier in a milky-white retro finish — bacteria-free fresh water, 6 temperature presets, 2 volume presets, 3-second instant heat, and a compact body. Scope: small households of 1-3, renters, dorms, offices, and compact kitchen/bedroom/study spaces. No installation — add municipal tap water and use. The output is mineral-preserving fresh water, drinkable without boiling.
What is Fresh Water (UF Mineral-Preserving)?
The M3 Yingchuan uses ultrafiltration (UF), centered on the UF-3.0-U106 membrane (fits U307/U308), paired with an ion-exchange resin filter and a PP+carbon composite filter across three stages. The UF membrane pore size is about 0.01-0.1µm, removing bacteria, colloids, and large organic molecules while keeping beneficial minerals such as calcium and magnesium — the output is fresh water, drinkable without boiling.
Daily drinking: Drink directly after bacteria removal; minerals keep the taste crisp.
Brewing tea: 6 levels from 45°C formula to 98°C tea — dedicated temperature for each.
Kitchen water: Safer for rice, soup, and rinsing fruit.
UF produces no waste water — good if you want to avoid it. But UF cannot remove heavy metals; in areas with extremely hard water or heavy-metal exceedance, choose an RO model.
Bewinch Product Line
| Series | Positioning | Representative Models | Highlights |
|---|---|---|---|
| N Series Smart Purifier | Ideal, smart, quality, healthy | N9Pro / N9s / N9Max N7 / N5 | Hydrogen water, smart touch, premium flagship |
| G Series Countertop Purifier | Lifestyle, safe, steady, family | G7s / G7i / G7 G3 Pro / G5 | Mineral alkaline water, instant heat, modular wellness |
| S Series Premium Brewing | Extraction, tea, wellness, luxury | S9 / S5 / S1 | Simulated open-flame brewing, tea & wellness |
| M / Q Series Mini Purifier | Portable, compact, entry | M3 Yingchuan / M3 Pro / Q5 / Q7 | Compact, entry price, rental-friendly |
As the inventor of countertop purifiers, Bewinch has served 20 million+ families, with nearly 3,000 stores and 1,300+ service centers nationwide.
Core Highlights
Core Technology Details
Stage-1 ion-exchange resin reduces scale and improves taste; stage-2 PP+carbon composite removes sand/rust and adsorbs chlorine, color, and odor; stage-3 UF membrane (UF-3.0-U106) removes bacteria, colloids, and large organics. Working together, the output is mineral-preserving fresh water, drinkable without boiling.
The instant-heat element heats from ambient to 98°C in about 3 seconds — fresh-boiled on demand, no repeated boiling. Six levels (45/55/65/75/85/98°C) cover ambient drinking, warm formula, and hot tea.
The spout light has three colors: blue for ambient water, red for hot water, green for draining — so you can tell the water status at a glance, safely and intuitively.
Sanitation approval: (Su) Wei Shui Zi (2024) No. 3205-0095. Standards: GB4706.1 / GB4706.19, Q/320505LK 006.
Accessories & Consumables
The M3 Yingchuan is a no-install countertop UF purifier with no external lines or expansion modules; daily accessories are mainly filters and cleaning consumables, replaced as needed.
| Accessory | Description | Replacement |
|---|---|---|
| Stage-1 Ion-Exchange Resin Filter | Ion-exchange scale reduction, better taste, eases scaling | About 6 months |
| Stage-2 PP+Carbon Composite Filter | PP melt-blown + carbon; removes sand/rust, adsorbs chlorine, color, odor | About 6 months |
| Stage-3 UF Filter (UF-3.0-U106) | Removes bacteria, colloids, large organics; fits U307/U308 | About 1 year |
| Food-Grade Citric Descaler | Periodic descaling of raw tank and heat lines | Every 3-6 months |
| Drip Tray | Catches splashes; removable for rinsing | As needed |
Buy original filters through the official store, mini-program, or 1,300+ service centers. Non-original parts may cause substandard water or machine faults.
Specifications
Core Parameters
| Model | JST-U307 (M3 Yingchuan, 2023) |
| Category | Home purifier (countertop UF purifier) |
| Color | Yingchuan milky white |
| Water Type | Fresh water (UF mineral-preserving) |
| Filtration | UF + ion-exchange resin + PP+carbon composite, three stages |
| Heating | Instant heat, 3 seconds |
| Hot Levels | 6: 45/55/65/75/85/98°C |
| Volume Presets | 2: 100mL / 200mL |
| Dispense Light | Blue ambient / red hot / green drain |
| Raw Tank | 2.5L (2023) / 3.0L (Sam's Club) |
| Purified Tank | 300mL |
| Rated Purified Capacity | 1000L |
| Flow | 48 L/h |
| Inlet Temp | 5°C - 35°C |
| Inlet Water | Municipal tap water |
| Working Pressure | 0.05 - 0.1 MPa |
| Suitable For | 1-3 people |
| Power | 220V~ 50Hz, 2200W |
| Size (W×H×L) | 185 × 388 × 328 mm |
| Installation | No-install countertop; add water and plug in |
Filter Information
Three independent filters — replace whichever expires. The panel shows a smart filter-life indicator.
| Stage | Filter | Replacement | Function |
|---|---|---|---|
| 1 | Ion-Exchange Resin Filter | About 6 months | Scale reduction, better taste |
| 2 | PP+Carbon Composite Filter | About 6 months | Sand/rust; chlorine, color, odor |
| 3 | UF Filter (UF-3.0-U106) | About 1 year | Bacteria, colloids, large organics; fits U307/U308 |
Filter life depends on power-on time, local water, daily volume, and pressure. Unopened filters have a 5-year shelf life — store in a cool, dry place.
Power & Environment
| Item | Value / Notes |
|---|---|
| Rated Power | 2200W (instant heat; heats only while dispensing) |
| Voltage / Frequency | 220V~ 50Hz |
| Heating | Instant heat; ambient to 98°C in ~3s; fresh-boiled |
| Waste Water | UF unit — no concentrate/waste water |
| Scale Inhibitor | No chemical inhibitor; softens via ion-exchange resin |
| Energy Saving | Auto screen-off standby; instant heat saves power vs. a re-boiling kettle |
| Wetted Materials | Food-grade; meet drinking-water standards |
After 72+ hours unused, drain the old water before use.
First Use
What's in the Box
| Item | Description | Qty |
|---|---|---|
| Main Unit | M3 Yingchuan purifier (milky-white) | 1 |
| Raw Tank | Raw tank (built-in stage-1 resin filter) | 1 |
| Purified Tank | 300mL purified tank | 1 |
| Filters | Stage-2 PP+carbon and stage-3 UF filter, pre-installed | 2 |
| Drip Tray | Tray under the spout | 1 |
| Power Cord | Dedicated main-unit cord | 1 |
| Manual / Warranty | User manual, warranty card, certificate | 1 set |
If any part is missing or damaged, contact online support or call 400-828-0808.
Placement & Setup
1. Put it on a steady, solid, level surface, out of direct sun, humidity, and heavy cooking fumes.
2. Leave ventilation space around it; do not press the back or sides against a wall or cabinet.
3. Place near a grounded 220V/50Hz outlet; do not pinch or pull the cord.
4. The counter must support the unit plus water; avoid table edges.
1. Confirm all three filters and both tanks are seated.
2. Fill the raw tank to the max line with matched tap water (5-35°C).
3. Confirm voltage matches the rating plate (220V~ 50Hz) before powering on.
New-Unit Flush Guide
1. Start filtration: Fill the raw tank to the max line, refit the unit, power on, and wait until the pump stops and the water lamp goes out.
2. Drain & flush (×3): Long-press "Dispense/Stop" for ~5s to enter drain mode (light turns green); the purified tank drains automatically. Empty the drip tray, refill, and repeat 3 times to fully flush filters and lines.
New filters and lines may carry a slight factory smell — it fades with repeated flushing.
Daily Use
Dispensing Water
Once the purified tank has water, press "Dispense/Stop" for ambient water; the spout light turns blue.
1. Press "Hot Unlock" first.
2. Press "Temp" to choose a level (45/55/65/75/85/98°C).
3. Press "Dispense/Stop" to dispense hot water.
4. Press again to stop when you have enough.
The light turns red for hot water. Hold the cup close to the spout to avoid hot splashes.
Choose 100/200mL and press "Dispense/Stop" — it stops automatically at the set volume. To drain, long-press "Dispense/Stop" ~5s until the beep (light green); it drains and stops automatically, or press again to stop.
Temperature Levels & Uses
| Level | Recommended Use |
|---|---|
| Ambient | Daily drinking and hydration; mineral-preserving fresh water, crisp taste |
| 45°C | Baby formula, warm drinking; ideal formula temperature that preserves nutrition |
| 55°C | Honey water, mild tea — gentle on the palate |
| 65°C | Flower/fruit tea; gently releases aroma |
| 75°C | Fruit drinks, delicate green tea, early pour-over coffee |
| 85°C | Green tea, coffee extraction; draws out tea polyphenols and coffee aroma |
| 98°C | Black tea, oolong, pu-erh — full boiling brew |
Filter Reset & Long Idle
1. Long-press "Temp" ~5s to enter filter selection.
2. Short-press "Temp" to select the filter to reset (stage 1/2/3).
3. Long-press "Hot Unlock" ~3s to reset it; the indicator returns to full.
After fitting a new filter, repeat the drain cycle 3 times to fully soak it before normal use.
The screen shows H2. Empty the old raw water, refill with fresh tap water, long-press "Dispense/Stop" 5s to drain, and repeat filtration-drain 3 times to fully replace the stored water before drinking.
Filters & Care
Filter Structure & Life
Three independent filters — replace whichever expires. Follow the panel indicator.
| Stage | Filter | Replacement | Function |
|---|---|---|---|
| 1 | Ion-Exchange Resin Filter | About 6 months | Scale reduction, better taste |
| 2 | PP+Carbon Composite Filter | About 6 months | Sand/rust; chlorine, color, odor |
| 3 | UF Filter (UF-3.0-U106) | About 1 year | Bacteria, colloids, large organics |
Filter life depends on power-on time, local water, and daily volume; replace per the indicator.
Replacing & Resetting Filters
1. Cut power and open the top cover.
2. Hold the old filter handle, turn to unlock, and lift it out.
3. Align the new filter with the slot, insert, and turn to lock.
4. Power on; long-press "Temp" 5s, short-press to select the filter, long-press "Hot Unlock" 3s to reset.
5. Drain-flush 3 times to soak the new filter.
Do not pull out a filter while the unit is filtering (it causes air lock). Use Bewinch original filters (UF-3.0-U106, fits U307/U308). Non-original parts may void the warranty.
Cleaning & Descaling
Raw tank: Clean every 1-2 months with a soft cloth and neutral detergent, rinse, and refit. For scale, dissolve 5-10g citric acid in 65°C water, soak 30-60 min, then wipe and rinse.
Drip tray: Empty and rinse it regularly.
Body: Wipe with a soft dry or slightly damp cloth; avoid corrosive cleaners and hard scourers. Keep it out of direct sun, humidity, and heavy fumes.
Descale every 3-6 months: (1) Citric acid: add warm water and food-grade citric acid to the raw tank, run filtration/dispense to circulate, soak 15-30 min, drain, rinse 2-3 times. (2) White vinegar: circulate a vinegar-water solution, soak ~1 hour, drain, and rinse 5-6 times until no vinegar smell.
Never immerse the whole unit; rinse the lines thoroughly after descaling.
FAQ
Water Quality
No. The M3 Yingchuan uses UF filtration; the three filters remove bacteria to produce fresh, drinkable water straight from the tap. It also heats to 98°C in 3 seconds when you want hot water.
UF filters at about 0.01-0.1µm — removes bacteria, colloids, large organics — but keeps minerals and produces no waste water. RO filters at 0.0001µm and removes heavy metals, bacteria, and viruses, but produces waste water and pure water. The M3 Yingchuan is a UF unit for good water that keeps minerals; for very hard or heavy-metal areas, choose a G/N-Series RO model.
By energy conservation, a higher target temperature needs more heating power; at max power the unit reduces flow to reach the set temperature. The hotter you set it, the lower the flow — this is normal.
Operation
Fill the raw tank and filter to full; long-press "Dispense/Stop" 5s to drain (green light), empty; refill and repeat filtration-drain 3 times. New filters may carry a slight factory smell that fades with flushing.
Press "Hot Unlock" first, choose a temperature with "Temp" (45-98°C), then press "Dispense/Stop". The spout light turns red for hot water.
Never pour hot water into the raw tank — it may deform the tank. Use municipal tap water at 5-35°C; never add sewage, drinks, or other liquids, which harm filters and may clog lines.
The screen shows H2. Empty the old water, refill with fresh tap water, drain, and repeat filtration-drain 3 times before drinking.
Filters
Life depends on power-on time, local water, and daily volume. Poor raw water or heavy daily use shortens life — normal; follow the indicator.
Filtration weakens over time; overdue filters may lose effectiveness, cause secondary contamination, or clog lines. Replace promptly when prompted.
Stage-1 resin ~6 months; stage-2 PP+carbon ~6 months; stage-3 UF (UF-3.0-U106) ~1 year. Actual life follows the panel indicator.
Unopened filters keep for 5 years in a cool, dry place — safe to stock up.
After-Sales
The M3 Yingchuan carries a 2-year whole-unit warranty; non-user-caused quality faults within 2 years are covered free. National hotline: 400-828-0808.
No. The M3 Yingchuan is a no-install countertop unit — add tap water and plug in; no professional installation or on-site visit needed.
Troubleshooting
Display won't light?
No filtration / very low flow?
No hot water?
Off taste?
Shows H2 code?
Still shows filter expired after a change?
Noisy / unusual sound?
Leak under / around the unit?
Slow flow / low volume?
Strong smell on a new unit?
Touch unresponsive / buttons dead?
Comparison
M3 Yingchuan vs M3 Pro Huyun
| Item | M3 Yingchuan (U307, 2023) | M3 Pro Huyun (U307) |
|---|---|---|
| Positioning | M-Series UF purifier · 2023 | M-Series entry bacteria-free purifier |
| Color | Yingchuan milky white | Huyun (retro elegant) |
| Water Type | Fresh water (UF mineral-preserving) | Bacteria-free fresh (composite UF-3.0) |
| Highlights | Bacteria-free drinking, retro, compact | Composite UF bacteria-free, ion-exchange scale reduction |
| Hot Levels | 6 (45/55/65/75/85/98°C) | 7 temperature levels |
| Volume | 2 (100/200mL) | 2 presets |
| Raw Tank | 2.5L (2023) / 3.0L (Sam's) | 3.0L |
| Purified Tank | 300mL | 0.3L |
| Filters | Resin + PP/carbon + UF (UF-3.0-U106) | Pre-composite + UF main + resin layer |
| Flow | 48 L/h | 48 L/h |
| Rated Capacity | 1000L | 1000L |
| Size | 185×388×328mm | ~185×388×328mm |
| Power | 2200W | 2200W |
| People | 1-3 | 1-3 |
| Warranty | 2-year whole-unit | 2-year national (1Y replace-not-repair) |
Both share the U307 platform with the same core purification and heating; the differences are color, tank version, and presets. The M3 Yingchuan is the 2023 milky-white version with a 2.5L (2023) / 3.0L (Sam's) tank; the M3 Pro Huyun is the retro Huyun finish with a 3.0L tank. This page shows the M3 Yingchuan — please distinguish the model and finish when ordering.
M-Series Lineup
| Model | Positioning | Highlights |
|---|---|---|
| M3 Yingchuan | M-Series UF purifier · 2023 | Milky-white, bacteria-free drinking, 6 temps/2 volumes, 3s heat |
| M3 Pro Huyun | M-Series entry bacteria-free | Composite UF bacteria-free, ion-exchange scale reduction, retro finish |
| M5 Fula | M-Series upgrade | Upgraded UF, larger tank |
| Q5 / Q7 | Q-Series mini purifier | Ultra-compact, entry price |
Want the retro milky-white compact UF experience? Choose the M3 Yingchuan. Want a 3L tank and more temperature presets? Choose the M3 Pro Huyun. For RO pure water, larger tanks, or wellness features, see the G-Series.
Support & Downloads
After-Sales Policy
| Service | Details |
|---|---|
| Whole-Unit Warranty | 2 years (from purchase; non-user quality faults covered free) |
| Service Network | 1,300+ service centers nationwide |
| Hotline | 400-828-0808 |
The M3 Yingchuan carries a 2-year whole-unit warranty. Bewinch operates nearly 3,000 physical stores and 1,300+ service centers nationwide.
Contact
400-828-0808
For online support, contact the store where you purchased through the official Bewinch online stores or mini-program. Buy original filters only through official channels.
1. Call the service hotline 400-828-0808 to book;
2. After booking, a specialist calls to confirm the visit time;
3. A Bewinch professional performs on-site service, setup, and guidance.
Safety Precautions
- Read the user manual carefully before use and keep it for future reference.
- Children must operate the unit under adult guidance to avoid scalding.
- Do not disassemble, repair, or modify the unit yourself.
- Connect the cord only to a supply matching the rating plate (220V~ 50Hz).
- Use matched municipal tap water at 5-35°C.
- Never pour hot water into the raw tank — it may deform.
- Place the unit steadily and keep water out of the electrical parts.
- Never immerse or spray the whole unit.
- Replace filters on time; the cycle varies with water use and quality.
- After a new filter, wait for the purified tank to fill, drain it, and repeat 3 times.
- Do not use corrosive cleaners on the body.
- Do not place containers of water, medicine, food, or small metal objects on top.
- If the unit makes unusual noise or leaks, unplug it immediately and call the national hotline.
- After 72+ hours unused, fully drain the internal water, refill, and repeat filtration-drain 3 times before reuse.
- Non-original filters may have hygiene/sealing issues and may cause abnormal water or shorten machine life.
Manual & Video Tutorials
- Choosing a selection results in a full page refresh.
- Opens in a new window.
