Bewinch Q7 Xiaojimu R325

Ice-drink / coffee lovers: add ice, cold, and sparkling modules — 6-min ice, 8°C cold, creamy sparkling water one tap; make iced coffee and sparkling drinks at home.

Baby / light-wellness families: RO2.0S five-stage filtration + ore-activated zinc low-sodium, baby-grade direct drinking; 7 temp levels cover formula to boiling.

Sideboard / island counter: 32cm slim horizontal body, 5L side-pull tank, fits narrow counters for a home water bar.

DIY / curious young users: add modules like building blocks; one unit covers purify, ice, and sparkling.

Sideboard / island: slim horizontal unit fits into cabinetry; side-pull 5L tank refills without moving the machine.

Living-room bar: vintage pointer dial looks great; ice and sparkling on demand at gatherings.

Bedroom / study: G-radar night light wakes when you set down a cup; warm drinks in the dark.

If you want a modular purifier that expands like building blocks (ice / cold / sparkling / slush) and delivers zinc low-sodium mineral water, the Q7 is the Q-series step-up. On a budget or without ice/sparkling needs, consider the Q5 Hefeng / Q5Pro Muyu.

Bewinch's proprietary water-electricity transmission supports signal self-adaptation and a universal multi-module interface, swapping scenarios in 5 seconds so one machine covers ice, sparkling, and cold water. Four core modules — base, ice, sparkling, cold — switch freely. Every module has a hydrophobic valve for easy draining.

Bewinch RO2.0S five-stage filtration deeply purifies water, effectively removing bacteria, viruses, heavy metals (lead, mercury, arsenic, chromium, cadmium), microbes, and nitrates. Ore-activated technology lowers sodium and magnesium for a lighter, softer mouthfeel — baby-grade safety for the whole family.

Mineral testing: Suzhou Customs Comprehensive Technology Center, Report M202500426; baby-feature certification: China Household Electric Appliance Research Institute, Report 2025-RZB062-0106.

Through ore-activated technology, the Q7 extracts active zinc from natural ore and fuses it into water in ionic form — ready for metabolism, no gut conversion needed. It also reduces sodium and magnesium for a lighter, softer taste.

A 2.5L jug meets the family's daily needs. The upgraded UV structure achieves up to 99.9% bacteria kill, so water stays drinkable even after long sitting — convenient and reassuring.

Tested by: National Air Purification Product Quality Inspection Center, Report KJ2025000939.

The pointer design blends classic aesthetics with smart tech and carries a real-time water-quality monitor, so machine status is clear and everyday practical. The monitor reads TDS before mineralization; because the output is mineralized, its TDS reads slightly higher — normal.

A micro-computer smart sensor wakes the light the moment you set down a cup, making night-time pouring easy. It adds a raw-water smart light reminder for a better experience.

Bewinch's settling float-sensing waste-layer structure uses a flow-divider and float-sensing level monitoring to hold the waste ratio around 3:1 for steadier running and longer filter life.

Never pull out the tank while the unit is purifying — it draws in air, causing an air-lock that stops purification.

• UV sterilization: National Air Purification Product Quality Inspection Center, Report KJ2025000939, 99.9% bacteria kill.
• Mineral testing: Suzhou Customs Comprehensive Technology Center, Report M202500426.
• Baby-feature certification: China Household Electric Appliance Research Institute, Report 2025-RZB062-0106.
• Water efficiency: certified Grade 2.
• Health license: (Su) Wei Shui Zi (2025) No. 3205-0084.

Raw tank: remove the lid, hold the handle, lift the tank, fill with standard municipal tap water to the max line, seat it on the unit.

Power: before plugging in, confirm 220V~ and that the outlet is rated ≥10A; keep the plug and hands dry.

Fill the raw tank to the max line, refit the jug lid, top cover, raw tank, and raw-tank lid in order, then power on. When the purified-water light goes out, purification is done. Early purified water first fills the filter pipes, so the jug holds little; raw water may look cloudy as gases escape — normal, clears after sitting a few minutes.

Place a container >3.5L under the spout; long-press "Dispense/Stop" ~5s; a beep enters drain mode. When done, empty the raw tank, refill, and re-purify. Repeat purify-and-drain 3-5 times.

Place a container >3.5L under the spout; turn the temp knob to 45°C, press "Dispense/Stop" until the purified-water light flashes. Repeat with 1-2 tanks of raw water.

Place a container >3.5L under the spout; turn the temp knob to 98°C, press "Dispense/Stop" until the light flashes. Repeat with 1-2 tanks.

After flushing, the unit is ready. After a filter change, also drain the jug three times to flush the new filter.

Above 1,500m altitude, do not take 98°C hot water to avoid steam spitting. If the unit hasn't reached target temp 20s after taking 98°C water, it auto-enters highland mode.

1. Take out the ice module and accessories, remove the top cover and ice-bin lid, let the unit sit 12-24h. 2. Pull out the main unit's lower coupler, remove the silicone plug. 3. Lift the ice module, align the upper coupler with the lower, seat level. 4. Refit the drip tray, ice-bin lid, and top cover — done. First ice use: keep the raw tank above 1/2 and wait 20-30 min to fully cool before taking cold water/ice.

Wait until the purified-water icon goes out or stops flashing, then press "Dispense/Stop" for ambient water; press again to stop. The dispense light is blue for ambient, red for hot, and green while draining.

1. Turn the temp knob to choose water temp (ambient / 45 / 55 / 65 / 75 / 85 / 98°C). 2. Turn the volume knob to choose a single volume (60 / 120 / 180 / 250 / 300 / 500mL / continuous). 3. Press "Dispense/Stop" — it stops automatically at the set volume. 4. Press again mid-dispense to stop manually. If child lock is on, press "Smart Lock" once before dispensing.

Long-press "Dispense/Stop" 5s; release on the beep to enter drain mode (green drain light on); the light goes out when draining finishes.

1. Turn the temp knob to your desired temp, then the volume knob to your desired volume. 2. Long-press "Smart Custom" 3s to save. 3. To use it, press "Smart Custom" then "Dispense/Stop".

On/off: long-press "Smart Lock" 5s; "LOC" = on, "ULO" = off. It defaults off after a power cycle. Dispensing when locked: short-press "Smart Lock" once, then dispense. TDS "999" alarm switch: long-press "Smart Lock" 10s; on the second beep, toggle the 999 raw-water alarm (shows "AL" 1s on, "UAL" 1s off).

The screen dims when idle; touch any key or turn any knob to wake it. Set a cup in the IR sensor zone at the center of the drip tray (transparent cups may not trigger) and the screen, dispense light, and ambient light wake.

1. Power off, remove the raw tank, take off the top cover. 2. Following the marks, remove the due filter (No.1 example): turn lock→unlock, lift out. 3. Drop in the new filter by the arrow, then turn unlock→lock. 4. Power on; the unit self-checks and auto-recognizes/resets, with the life light turning solid white — done. No manual reset needed; the sensor resets during the swap. Non-official filters cannot be reset and the unit won't run.

After changing a filter, see "First Use" — drain the jug three times to flush the new filter. Non-original filters may lack hygiene assurance, filtration, and sealing, causing water issues and safety risks; buy from authorized e-commerce, dealers, or official channels.

1. After drain mode, once empty, unplug. 2. Pinch the lid handle, lift the top cover, then open the jug lid. 3. Wipe the jug and lid inside with a clean soft cloth (boiled-washed). 4. Refit the lid and top cover; fill the raw tank to the max line. 5. Plug in, let it purify to full, then drain and repeat 3 times. Clean the storage tank every two months.

Clean every 1-2 weeks. Remove, rinse the inside, wipe with a soft cloth. If scaled, add a food-grade descaler (included with purchase) during soaking, then rinse several times to avoid residue.

Remove the drip tray in the shown direction and clear pooled water promptly; don't leave it hanging (cups may fall). Wipe the body with a soft dry cloth; no corrosive solutions. Avoid direct sun and heavy oil smoke.

When re-enabling after 72+ hours: 1. power on and fully drain internal water; 2. refill the raw tank; 3. let the jug fill, then drain; 4. repeat 3 times. If idle over 12h, before reuse dispense 5s of 98°C hot water and drain, then use. Even if idle long, keep the unit powered.

① Body: soft dry/damp cloth; no corrosive cleaners/steel wool; no full immersion or spray. ② Raw tank (5L side-pull): pull out every 1-2 weeks, rinse, wipe; deep-clean at least every 2 months. ③ Jug (2.5L): open and clean every 2-3 months, rinse; built-in UV long-acting sterilization. ④ Internal purified tank: semi-sealed PP inside the unit; open and clean every 2-3 months per the manual. ⑤ Ice bin: visible cleanable bin; remove for deep cleaning; clear the drip tray. ⑥ Sparkling bottle: rinse only with 0-40°C cold water, air-dry; no hot water, dishwasher, or sterilizer.

After long use the raw tank or heating path may scale; descale every 3-6 months: 1. Add warm water to the raw tank, dissolve food-grade citric acid descaler. 2. Purify/dispense so the solution flows through the path and heater. 3. Soak 15-30 min, then empty. 4. Refill clean water and purify/drain 3+ times to remove residue. Use food-grade citric acid, not strong acid. After 72+ hours idle, drain internal water, refill raw, fill then drain, repeat 3 times.

Normal. Early purified water first fills the filter pipes, so the jug holds little; wait for the raw-change indicator, then refill and continue. Raw water may look cloudy as gases escape — normal physics, clears after sitting a few minutes.

After a new unit or filter change, raw water turns cloudy as large amounts of gas escape from the filters — normal physics; it clears after sitting and is fine to use.

White foam is normal — fine bubbles that disappear at rest; safe to drink. During purification, pressure pushes water through the membrane and some air dissolves; it comes out as fine bubbles when pressure releases.

The monitor reads TDS before mineralization; output reads slightly higher because it's mineralized with natural minerals — normal and exactly the Q7's character (lighter, softer taste from active zinc).

Possible: filter expired, or the unit sat long. Replace the filter, drain standing water, clean both tanks, refill raw water and re-purify. For a new unit, complete the full flush.

Turn the temp knob to choose water temp (ambient/45/55/65/75/85/98°C); the matching white light comes on. Turn the volume knob to choose a single volume (60/120/180/250/300/500mL/continuous); the matching light comes on. Press "Dispense/Stop" to dispense.

Long-press "Smart Lock" 5s; "LOC" = on, "ULO" = off. When on, short-press "Smart Lock" once to unlock, then dispense. It defaults off after a power cycle.

This is eco mode. The screen dims when idle; touch any key or turn any knob to wake. Set a cup in the IR zone at the drip-tray center (transparent cups may not trigger) to wake it.

The Q7 uses 3 filters: No.1 compound and No.3 post filters every 6-8 months; No.2 RO membrane every 2-3 years. To change: open the top cover, turn the old filter lock→unlock, fit the new one and turn back to lock, power on and wait for auto recognition; then drain/rinse 2-3 times. Actual life depends on frequency, water TDS, and volume dispensed — follow the screen.

Unopened filters keep 5 years; store in a cool dry place. Slightly higher TDS just after a change is normal — food-grade grease at the joints and slight carbon release on first use; it normalizes after a good flush.

Add 5-35°C municipal tap water or purified water. Never add hot water, ice water, beverages, sewage, or other liquids — they can damage filters and the machine. This is a non-plumbed unit; waste water sits in the raw tank — just empty it on refill, no drain line needed.

Without the purify module installed, one bar means the jug is low and needs refilling/purifying. With the module installed, one bar is the jug protection level (5-10mm) — there is water to draw; normal, not a fault. The Q7's modular design combines purify and drink modules for different scenarios.

The Q7 enjoys a 2-year nationwide warranty: year 1 is "replacement-only" (a new unit for quality issues), and year 2 covers free repair for non-human damage. For support, contact the store where you purchased. First-time users can book a free on-site setup via the Bewinch official mini-program.

The Q7 has a vintage modular design supporting ice, slush, and sparkling modules, swapped freely via the MixHub base in 5 seconds — one unit, many uses.

The Q7 comes with an expandable removable UV sterilizing jug that lifts off the main unit to refill or chill independently; built-in UV keeps stored water fresh and the larger capacity serves more people.

When the night environment is too dark, the light sensor auto-stops ice-making to reduce noise; blocking the sensor doesn't stop it immediately — there's a delay.

The MixHub base uses water-electric transmission — no plugging/unplugging; a swap takes 5 seconds.

To avoid boiling over-pressure in sealed pipes, heating is held above 90°C and below 100°C. The output is RO-filtered to direct-drink standards.

After a change, twist the new filter into place; the chip auto-senses and resets, and the light returns to full with a beep. If it doesn't reset, pull out and re-twist. Each filter chip resets only once.

Fill the raw tank, power on and purify, long-press "Dispense/Stop" 5s to drain, repeat ambient drain 3-5 times, then flush with 45°C and 98°C water 1-2 times each.

Yes — 100% performance water-testing before shipping may leave a little residue; normal.

Empty the raw tank and refill tap water, drain, fill, drain, repeat 3 times before use.

Scan the mini-program QR on the unit, open the Bewinch mini-program, choose "Install/Repair", or contact the store where you purchased. Non-human damage within the purchase year enjoys replacement-only.

Cut power and stop supply immediately, locate the leak, and contact official after-sales. Never disassemble the unit yourself.